Scenes; S1: Zero Out (Board Reset) - PRESONUS studiolive III series Owner's Manual

8 Master Control
8.5

Scenes

Scenes
8.5
8.5.1

S1: Zero Out (Board Reset)

Inputs and Output
Buses Level
Input Chan-
-∞
nels
Flex Buses -∞
FXA Unity
FXB Unity
FXC Unity
FXD Unity
Aux In A/B -∞
Solo Bus -∞
Monitor Bus -∞
Tape In -∞
The StudioLive allows you to create and store a library of scenes. A scene is like a
snapshot of your mix. It stores each Fat Channel parameter for every input and bus,
as well as each fader's position, the aux and effects mixes, channel mutes and solos,
and the input selection (analog input or digital playback stream).
To begin working with scenes, press the Scenes button. This brings the Scenes screen
onto the touchscreen. On this screen, a list of all existing scenes is shown.
Located at position S1 is a scene named Zero Out (Board Reset). This scene cannot
be overwritten and returns each parameter to its default setting. All you have to
do is lower all the Monitor bus output volume knobs to their lowest positions. The
StudioLive will be zeroed out as follows:
Assign Pan
Mains C
n/a n/a
Mains n/a
Mains n/a
Mains n/a
Mains n/a
Mains n/a
n/a n/a
n/a n/a
n/a n/a
Stereo
Solo Mute
Link
Off Off
Off N/a
n/a Off
n/a Off
n/a Off
n/a Off
n/a n/a
n/a n/a
n/a n/a
n/a n/a
StudioLive™ Series III
Owner's Manual
Aux/FX
Mode
Sends
Off -∞ n/a
Off n/a Aux: Pre 1
Standard
n/a n/a
Reverb: Post
Standard
n/a n/a
Reverb: Post
Mono Delay:
n/a n/a
Post
Mono Delay:
n/a n/a
Post
n/a -∞ n/a
n/a n/a AFL
n/a n/a Main
n/a -∞ -∞
75