Preamp Control; Stagebox Modes - PRESONUS StudioLive III Series Addendum

1 Getting Started
1.4

Preamp Control

1.4 Preamp Control
PREAMP HI PASS
Gain Filter
0 dB off
Level
OL
-2 Processor
Level Level
OL -12
OL -2
-2 -24
-12
-12 -36
-24
-24 -48
-36
-36 -65
-48
-48
Input
-65
-65
1.5

Stagebox Modes

Stagebox
StudioLive Series III
console mixer
Monitor Mix
Once the Network input has been selected on the StudioLive Series III console mixer,
PAN
you can remote control the preamp level and phantom power for your rackmount
< C >
Center
mixer from the top panel of your console mixer.
Note: When "Stand-alone" is selected for Stagebox mode, preamp and phantom power
control will not be available for remote control. These functions must be controlled from
UC Surface for your rack mixer.
StudioLive Series III rack mixers have three different modes of operation
when connected as a stage box to a StudioLive Series III console mixer.
Whichever mode is selected, preset and scene store and recall are independent
on each mixer. In other words, saving a scene or a preset on the console
mixer will not save the settings on the rack mixer and vice versa.
This is a more traditional stage box function, where the StudioLive
Series III rackmount mixer simply serves as a remote I/O box for the
StudioLive Series III console at FOH. All mixing, both FOH and Aux
mixing, is done on the StudioLive Series III console at FOH.
When this mode is active, the mixer DSP on the StudioLive Series III rackmount
mixer is bypassed, and all StudioLive Series III rackmount Main Left/Right outputs
are sourced from the console mixer's Main Left / Right signals. The StudioLive Series
III console mixer's FlexMixes are sourced from the rack mixer as described below:
StudioLive 16R
FlexMix 1-6
It should be noted that even though the StudioLive 32SC and StudioLive 16 console
mixers only have 10 outputs, it still has a full 16 Flex Mixes. Using a StudioLive Series
III rack mixer of a larger frame size will provide physical outputs for those mixes.
When Network is select as the Input Source for any channel on
the console mixer, you can remotely control the preamp gain and
phantom power for the respective channel on the rack mixer.
Note: While in Stagebox Mode, you will not have access to any function in UC Surface for
your rack mixer.
While this mode is active, the StudioLive Series III rackmount mixer retains
all its mixing functionality for every FlexMix, allowing you to create monitor
mixes and more using the FlexMix outputs. The Main Mix in this mode will not
be accessible or have any effect on the sound as this mix is sourced from the
Main Left/Right mix of the console mixer and must be controlled from there.
Power User Tip: The FlexMix outputs on your console mixer will remain active as well,
allowing you to use both sets of FlexMix outputs and, in effect, doubling your mixing
capability.
Stagebox Mode Addendum
StudioLive 24R
FlexMix 1-12
StudioLive™ Series III
StudioLive 32R
FlexMix 1-16
6