PRESONUS studiolive III series Owner's Manual page 52

Digital mix console / recorder with motorized fades
Hide thumbs Also See for studiolive III series:
Table of Contents

Advertisement

5
The Fat Channel
5.1
Fat Channel Navigation
5.1.4.3 Vintage 1970s EQ
4. High Boost. Sets the level of boost applied around the chosen high frequency.
5. High Bandwidth. Sets the Q (or width) of the effect of the high EQ band.
6. High Frequency. Sets the center frequency of the high EQ band.
7. High Attenuation. Sets the amount of attenuation applied in a shelving fashion
to frequencies at and above the chosen high frequency.
8. Attenuation Select. Sets the frequency at and above which the High
Attenuation control attenuates treble content.
Press the Processor button to turn the EQ on or off.
When the Fat Channel is in Passive EQ mode, the touchscreen shows an overview
screen, displaying the relevant parameters (as available in the Fat Channel).
Touching any onscreen knob allows you to use the Master Control encoder to set the
selected parameter.
1
2
4
1. EQ On/Off. Enables/disables the EQ globally. Touch to toggle on or off
2. Low Boost. Boosts the Low Band.
3. Low Frequency. Sets the center frequency for the Low Band.
4. Low Attenuation. Attenuates the Low Band.
5. High Bandwidth. Sets the bandwidth (Q) for the High Band.
6. High Boost. Boosts the High Band.
7. High Frequency. Sets the center frequency for the High Band.
8. High Attenuation. Sets the attenuation for the High Band.
9. Attenuation Select. Sets the Frequency at which the attenuation begins.
When the Vintage 1970s EQ is selected, the following controls are available in the Fat
Channel:
1
2
3
LOW
LOW
L-MID
Gain
Freq
Gain
0.00 dB
60 Hz
0.00 dB
1. Low Gain. Sets the amount of boost or cut to apply the low-frequency band of
this EQ.
2. Low Frequency. Sets the shelving frequency of the low-frequency band of this
EQ.
3. Lo-Mid Gain. Sets the amount of boost or cut to apply the low-mid-frequency
band of this EQ.
4. Lo-Mid Frequency. Sets the center frequency of the low-mid-frequency band of
this EQ.
5. Hi-Mid Gain. Sets the amount of boost or cut to apply the high-mid-frequency
band of this EQ.
6
8
9
4
5
6
7
H-MID
L-MID
H-MID
HIGH
Freq
Gain
Freq
Gain
700 Hz
0.00 dB
4.8 kHz
0.00
StudioLive™ Series III
Owner's Manual
48

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents