Lockout Mode; Firmware Version; Using Midi Control Mode To Remote-Control Studiolive - PRESONUS StudioLive 16.0.2 USB Owner's Manual

6 Digital Effects | Master Control
6.5

Using MIDI Control Mode to Remote-Control StudioLive

Lockout Mode

6.4.4
6.4.5

Firmware Version

6.5 Using MIDI Control Mode to Remote-Control StudioLive
Your StudioLive features a Lockout mode that allows you to create a
password and lock the controls. This is especially useful in situations
where several people will be running sound but only one or two are
knowledgeable enough to set up dynamics processing and the like.
Right out of the box, the StudioLive cannot be locked, so don't worry about
hitting the wrong button. To enable the Lockout feature, you must first connect
and sync your StudioLive to a computer. Please review the StudioLive 16.0.2
USB Software Library Reference Manual for more information on this feature.
The last page of the System menu displays the firmware version currently loaded
on your StudioLive. You normally will only view this screen when performing a
system update, to confirm that the new firmware was successfully loaded.
The StudioLive 16.0.2 USB features a distinctive MIDI Control Mode,
which, once enabled, allows you to remote-control the following
StudioLive parameters from a MIDI device or DAW:
Scene Recall
4
FXA Preset Recall
4
FXB Preset Recall
4
FXA Assign to Mains
4
FXB Assign to Mains
4
FXA Output
4
FXB Output
4
Main Output Level
4
To enable MIDI Control Mode, navigate to page 3 of the System menu
and set MIDI Control Mode to "On" by turning the value encoder.
This will enable your StudioLive 16.0.2 USB's MIDI features so that
the mixer can be controlled by any standard MIDI controller.
StudioLive™ 16.0.2 USB
Owner's Manual
53