3.2.3. Logging In
The default username is admin and the default password is admin. The first time that
you log in with the default username and password, you are required to enter a new
password.
To log in to the device configuration utility:
1.
Enter the default user ID (admin) and the default password (admin).
2.
If this is the first time that you logged on with the default user ID (admin) and
the default password (admin) it is recommended that you change your password
immediately. See "4.2.1. Password" on page 33 for additional information.
When the login attempt is successful, the System Status window displays.
If you entered an incorrect username or password, an error message appears and the
Login page remains displayed on the window. If you are having problems logging in,
please see the Launching the Configuration Utility section in the Administration Guide
for additional information.
3.2.4. Logging Out
By default, the application logs out after ten minutes of inactivity.
To logout, click Logout in the top right corner of any page. The system logs out of the
device.
When a timeout occurs or you intentionally log out of the system, a message appears
and the Login page appears, with a message indicating the logged-out state. After
you log in, the application returns to the initial page.
Getting Started
Figure 17 - System Status
15