Loop Detect/Prevent - Comtrend Corporation GS-7608 User Manual

4.1.9. Loop Detect/Prevent

Use this section to enable/disable and configure network routing loop detection.
Select settings from the drop down menu. At the time of writing this feature was only
available for GS-7608, GS-7408 and GS-7405.
To view the Loop Detection/Prevention menu, navigate to Loop Detection/Prevention.
Item
Off
Loop Detection
Loop Prevention
Apply
Web-based Switch Configuration
Figure 32 - Network > Loop Detection
Disable loop detection and prevention.
Enable loop detection.
Enable loop prevention
Click Apply to save the values and update the screen.
Description
29