Using The Remote Ui To Install (Delivery) - Canon imageRUNNER ADVANCE C2020 Setup Manual

Using the Remote UI to
Install (Delivery)
You can install the system options or MEAP applications to the
machine using the Remote UI.
To perform the procedures described in this section, you must
log in to the machine as an administrator. (See "Logging In Using
the Remote UI, " on p. 8.)

From the top page of the Remote UI, click [Settings/
Registration] → [License/Others] → [Register/
Update Software].
3

Click [Delivered Installation].

Enter the license access number → click [Next].
Once the license access number is confirmed after contacting
the delivery server, information for the system options/MEAP
applications you can install are displayed.
56
If the license access number is incorrect, an error page is
displayed.

Select the system options and MEAP applications →
click [Start Installation].
Status after Installation:
Start: Starts the installed MEAP applications.
Stop: Stops the installed MEAP applications.
If [Stop] is selected when installing MEAP applications, you must
start the application before using the MEAP application. (See
"Starting the MEAP Applications, " on p. 59.)
If the agreement screen is displayed, read the agreement. If you
abide with the agreement, click [Accept].
5
Check the Installation Result screen.
When the installation of the system options is completed, the
message <Restart the device.> appears. Restart the machine to
enable the function.
To return to the Delivered Installation screen, click [To Delivered
Installation].
You can download the manual for the installed system options/
MEAP applications by accessing the URL for the manual
download site displayed on the Installation Result screen. (See
"Downloading the Manuals and Related Software, " on p. 60.)