Canon imageRUNNER ADVANCE C2020 Setup Manual page 49

7
Specify the following settings → press [OK].
In this example, the following settings are specified:
[Name]: images
<Protocol>: SMB
[Location]: \\192.168.1.23\share
8
Press [Close].
The Network Place Settings are now set.
Next, specify the Protocol for External Reference settings.
9
Press [Protocol for External Reference].
0
Select [On] for <SMB> → press [OK].
The Protocol for External Reference settings are now set.
Next, specify the Store Location Display Settings.

Press (Settings/Registration).

Press [Preferences].

Press [Display Settings].

Press [Store Location Display Settings].
2
7