Updating The Firmware; Updating Firmware - Canon imageRUNNER ADVANCE C2020 Setup Manual


Click [Display Logs /Communication Test] →
[Communication Test].
When the confirmation dialog is displayed, click [Yes].
Contents for the test are downloaded from the delivery server.
When the communication test is completed, the communication
test result screen is displayed.
If 'Failed' is displayed on the communication test result screen,
check that the network cable is connected and that the network
settings are correct. If the problem is not resolved, contact your
local authorized Canon dealer.

Updating the Firmware

This section describes how to update firmware.

Updating Firmware

Using the Register/Update Software function, you can update
the firmware of the machine to the most recent version.
• For information on the log in service, see e-Manual > MEAP. If
the authentication function is not set, the Log In screen is not
displayed.
• For information on necessary system environment and
preparation to start the Remote UI, see e-Manual > Remote UI.
• Multiple users cannot use the Register/Update Software function
at the same time.
• If another user is logged in to SMS (Service Management
Service), you cannot use the Register/Update Software function
from the Remote UI.
• If the following procedure is performed, you cannot use the
Register/Update Software function from the Remote UI for a
specified time:
• When Remote Login Service of the SMS is set and the Web
browser was closed without pressing [Portal] or [Log Out]
• When Remote Login Service of the SMS is not set and the Web
browser was closed without pressing [Portal]
• When the Web browser was closed without pressing [Log Out
from SMS], [To Remote UI], or [Log out] of the SMS
• For more information on SMS, see e-Manual > MEAP.
You can update the firmware using the data that is distributed
separately from the machine.
Obtaining the
Firmware
Registering the
Firmware from the
Remote UI
3
Updating the
Firmware
This Machine
6