Table of Contents
Advertisement
Disk Management
Network
Support
Camera IP Address &
Port
Dual Gigabit LAN
Utility Software
Security
Operation System
On-line Users List
Host Access Control
User Management
Alert Notification
UPS
Event Logs
Client PC Requirement
CPU
Single disk, RAID 0 (Disk Striping), RAID 1 (Disk
Mirroring), and JBOD (Linear Disk Volume)
Online RAID Capacity Expansion
Online RAID Level Migration
HDD S.M.A.R.T.
Bad blocks scan
Services: Web File Manager, FTP, SMB/CIFS
HTTP, TCP/IP, SMTP, DHCP, Static IP, DNS, DDNS, FTP, NTP,
UPnP, Failover, Load-balancing, Multi-IP setting
Allow setting LAN/WAN IP address of each camera
Failover: In case one of the LAN network fails, the
packets sent to the NVR will be handled by the other
LAN interface
Load-balancing: Link aggregation is supported to
increase the transfer speed
Multi-IP setting: The NVR can serve different network
groups in two different subnets
QNAP Finder: Discovery and quick setup for NVR
Linux-embedded, free from PC crash and virus attack
Record of the users currently logged on and previously
logged on to the NVR
Specify the connections to be allowed and denied to access
NVR
The right to monitor and playback each camera can be
separately defined for each user (up to 32 users)
E-mail, buzzer, event logs
Support APC/ MGE (USB type UPS)
Detailed event logs of system warning, hard disk error,
network disconnection, UPS status, and users' networking
services, and data access
Motion-JPEG format (up to 12 channels): Pentium 4
CPU 2.4 GHz or above
MPEG-4/ H.264 format (up to 12 channels): Dual core
CPU 2.4 GHz or above
99
Advertisement
Table of Contents
