Table of Contents
Advertisement
Fig. 43 Adjusting the rear head restraints.
Please first read and note the introductory information and
heed the WARNINGS →
Introduction
All seats are equipped with head restraints. The rear center head
restraint is designed only for the center seat on the rear bench.
Therefore, only install the center head restraint in the center
position.
There are notches in the head restraint guide rods so that the head
restraint can lock into place. Only properly installed head restraints
can lock into place at the adjustment range notches. In order to
prevent inadvertent removal of the head restraints after installation,
there are stops at the top and bottom of the adjustment range.
Adjusting the height
Advertisement
Table of Contents
