Using a safety belt extender
Adjust both the seat and the head restraint properly → Adjusting
the seating position .
Insert the buckle tongue on the safety belt extender → Fig. 65 ②
into the vehicle belt buckle for the seat where the safety belt
extender is being used → Fig. 65 ① .
Fastening or unfastening the vehicle safety belt → Fastening and
unfastening safety belts .
Pull the belt to make sure that the tongues are securely locked in
the buckles.
Make sure that the safety belt is positioned properly → Safety belt
position .
Properly using safety belt extenders:
Use a safety belt extender only when the factory installed safety
belt is too short when worn properly by a person in proper seating
position.
Only use 1 safety belt extender per seat and vehicle safety belt.
Always remove the safety belt extender when it is not needed.
Never leave a safety belt extender attached to the vehicle safety
belt buckle when the extender is not needed and being used with
the safety belt. Otherwise, the airbag control module will receive