Table of Contents
Advertisement
Select the memory to be erased.
Press and hold the
wheel for about 2 seconds.
Enabling and disabling displays
On appropriately equipped vehicles, you can set which displays
should appear in the instrument cluster by pressing the
button followed by the
keys in the Infotainment system → Menu and system settings
(SETUP) . The units in which data is displayed can also be
changed.
Possible driving data menu displays
Display
Travel time
Conv. consumer
Range
-- mi
Range
-- km
Avg. consumption
--.- mpg
Avg. consumption
button on the multi-function steering
and
Driving time in hours (h) and minutes (min) corresponding to trip
memories 1, 2, and 3 (toggle).
Displays any convenience equipment in the vehicle that is
currently affecting fuel consumption.
Estimated distance in miles (km) that the vehicle can go with the
fuel left in the tank the way you are currently driving. Takes
account of the current fuel consumption, among other things.
Average fuel consumption in miles per gallon (l/100 km) on trips
per trip memories 1, 2, and 3 (toggle). For the since start trip
memory, the value is displayed once the vehicle has been driven
about 330 feet (100 m). Until then, dashes appear instead of a
Instrument cluster
Function
function
Advertisement
Table of Contents
