Default Settings Of The System Parameters - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Table 1-55 SHDSL alarm profile
Profil
e
Index
1

1.6.3.3 Default settings of the system parameters

The following table lists the default settings of the system parameters on the MA5600T/
MA5603T/MA5608T.
Table 1-56 System parameters
Index
0
1
2
3
4
5
6
Issue 01 (2014-04-30)
Profile Parameter
DEFV Loop attenuation threshold (unit:dB)
AL
SNR margin threshold (unit:dB)
ES threshold (unit:second)
SES threshold (unit:second)
CRC anomaly threshold
LOSWS threshold (unit:second)
UAS threshold (unit:second)
Dying gasp alarm switch
Reference status
Description
Sending howler tone flag, 0:not send, 1:send
Overseas version flag, 0:China, 1:HongKong, 2:Brazil,
3:Egypt, 4:Singapore, 5:Thailand, 6:France, 7:Britain
MSFUK, 8:Britain ETSI, 9:Bulgaria
Stop initial ringing flag, 0:not send, 1:send
The mode of voicemail, 0:high voltage, 1:FSK and ring,
2:FSK no ring
Global digitmap support flag 0:Not support, 1:Support
Transfer mode of media stream in a device, 0:Device
internal forwarding, 1:Device external forwarding
RTP 2833 Payload Type
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Commissioning
Factory Default
0
0
0
0
0
0
0
Enable
Unused
Default
1
0
0
1
1
0
97
209