Huawei SmartAX MA5603T Configuration Manual page 908

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Figure 11-6 Configuration Roadmap Diagram in the FTTB and FTTC Networking Scenarios
Using xDSL Access Without HGWs
The following table lists the configuration procedure.
Item
OLT
Issue 01 (2014-04-30)
Procedure
Add an ONU on the OLT.
Configure the management
channel between the OLT and the
ONU.
Configure the l Configure
service channel the Internet
between the access
OLT and the service
ONU. channel.
l Configure
the VoIP
service
channel.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 FTTB and FTTC Solution Configuration
Remarks
Services can be configured for an ONU only
after the ONU is successfully added to an
OLT.
After the inband management channel
between the OLT and the ONU is
configured and available, you can log in to
the ONU from the OLT to configure the
ONU.
The ONU provides only the Internet access
service and the VoIP service in the FTTB
and FTTC network using xDSL access
without HGWs. Therefore, you need to
create an Internet access service channel and
a VoIP service channel on the OLT.
883