Huawei SmartAX MA5603T Configuration Manual page 354

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Figure 3-13 Example network of the P2P ISDN BRA service
Prerequisite
l
l
l
l
Data Plan
Table 3-7
Table 3-7 Data plan for configuring the P2P ISDN BRA service
Item
MG interface ID
IUA link set
parameter
Issue 01 (2014-04-30)
The MG interface and the system parameters must be configured. For the related operations,
see Configuring an MG Interface and (Optional) Configuring the System Parameters. The
MG interface must be in the normal state.
The ISDN digital phone must support the P2P function.
The system must be configured with the ISDN service board, that is, the DSRD or DSRE
board.
The terminal endpoint identifier of the ISDN digital phone must be 0.
provides the data plan for configuring the P2P ISDN BRA service.
IUA link set ID
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuring the DSLAM Services
Data
0
1
329