Huawei SmartAX MA5603T Configuration Manual page 779

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
l
Issue 01 (2014-04-30)
huawei(config)#ont-lineprofile gpon profile-name fttd
huawei(config-gpon-lineprofile-1)#gem mapping 14 0 vlan 45
huawei(config-gpon-lineprofile-1)#commit
huawei(config-gpon-lineprofile-1)#quit
3. Configure the VLAN of the Ethernet port on the ONU.
Add Ethernet port 1 to VLAN 45 in the ONU service profile.
huawei(config)#ont-srvprofile gpon profile-name fttd
huawei(config-gpon-srvprofile-1)#port vlan eth 1 45
huawei(config-gpon-srvprofile-1)#commit
4. Create an Internet access service VLAN and add an uplink port to it.
Add uplink port 0/19/0 to VLAN 100.
huawei(config)#vlan 100 smart
huawei(config)#vlan attrib 100 stacking
huawei(config)#port vlan 100 0/19 0
5. Create Internet access service flows.
Set S-VLAN ID to 100 and GEM port ID to 14. Use traffic profile fttd_hsi.
huawei(config)#service-port vlan 100 gpon 0/1/0 ont 1 gemport 14 multi-
service
user-vlan 45 tag-transform translate-and-add inner-vlan 1001 inbound
traffic-table
name fttd_hsi outbound traffic-table name fttd_hsi
6. Save the data.
huawei(config)#save
Configure the HGW.
1. Log in to the web configuration window.
a. Enter http://192.168.1.1/cu.html (default IP address) to the address bar of the IE
browser and press Enter.
b. In the login dialog box, enter the user name and password of the administrator
(the Internet service provider (ISP) provides the default user name and default
password). Then, click OK.
2. Set parameters for the Internet access service.
Assume that ports LAN1 and LAN2 are Internet access ports for PCs.
a. Choose Network > Bandwidth Configuration from the navigation tree.
b. Create WAN connection 1 and set parameters based on the following table.
Parameter
Bearing
service
VLAN
enabling
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Value
INTERNET
Enabled: Upstream packets contain VLAN tags.
Disabled: Upstream packets do not contain VLAN tags.
NOTE
If uservlan is set to untagged when you configure a service flow for
the Internet access service on the OLT, set this parameter to
Disabled; otherwise, set it to Enabled.
10 FTTD Configuration
754