Snowblower Operation - Honda HS1810Z Owner's Manual

SNOWBLOWER OPERATION

7.
Before operating this equipment you should read and understand the
SAFETY INSTRUCTIONS on page
Efficiency of the snow removal work is significantly affected by the
snow condition (e.g. dry, wet etc.). Adjust the skid position and the
auger housing height as needed for the optimum snow removal.
Skid, Scraper
Adjust the skid for the auger housing ground clearance best suited to
your snow removal conditions.
To prevent accidental starting, turn the engine switch to the ''OFF''
position and disconnect the spark plug cap.
1. Park the auger snowblower on level ground clearance best suited to
your parking.
2. Hold the auger housing horizontally and lower the auger to the
ground operating the auger control lever.
3. Turn the engine switch to the ''OFF'' position and remove the engine
switch key.
4. Loosen the bolts and adjust the skid height to the road surface
condition.
5. After adjustment, tighten the bolts securely.
CLEARANCE
54
3 through
SCRAPER SKID
7 .
BOLTS