Honda HS1810Z Owner's Manual page 70

Removal of snow clogged in the chuter
Before removing clogged snow, be sure to stop the engine, and make
sure that all rotating parts have come to a complete stop. Remove the
spark plug cap from the spark plug.
1. Remove the chuter cover by pulling up the setting handle of the
chuter cover.
2. Remove the snow using the snow drop bar.
SNOW DROP BAR
3. After unclogging the snow, set the chuter cover securely.
SETTING HANDLE
CHUTER COVER
The chuter cover indicator (orange) will come ON and the engine does
not start unless the chuter cover is set properly.
4. Wipe the snow drop bar clean, and store it in the holders.
SETTING HANDLE
CHUTER COVER
67