Snowblower Operation - Honda HSS970 Owner's Manual

SNOWBLOWER OPERATION

7.
Before operating this equipment you should read and understand the
SAFETY INSTRUCTIONS on page
1. Start the engine according to the procedures described in page
2. Move the throttle lever to the FAST position for normal operation.
3. Release the auger clutch lever, and move the shift lever to select the
desired drive speed.
REVERSE
FAST
SHIFT LEVER
Low speed is recommended for removing deep or hard-packed snow.
4. Set the auger housing to ''HIGH'' position (See page
5. Fix the throwing direction by using the chute crank and the chute
guide. (See pages
44
3
''N'' (Neutral)
SLOW
SLOW
14 and 17 ).
through 8 .
FORWARD
FAST
FORWARD
REVERSE
35 .
FAST
SLOW
NEUTRAL
SLOW
FAST
22 ).