Honda HS1810Z Owner's Manual page 60

Auger height
The auger height can be adjusted by operating the auger control lever.
Determine whether the auger is set on the ground, or dug into the
snow or whether it is raised off the ground slightly according to the
road surface condition, and adjust the auger height with the auger
control lever.
Moving the auger control lever toward ''DOWN'' lowers the auger.
Moving the auger control lever toward ''UP'' raises the auger.
The auger stops in the position when the auger control lever is
released.
DOWN
AUGER CONTROL LEVER
The control motor overheats, which can cause malfunction of the
protector circuit and motor, and make the auger housing
unadjustable.
Stop operating the auger control lever when the auger housing
reaches the upper end or lower end position. Do not hold the auger
control lever operated.
The auger moves from the upper end position to the lower end
position in approximately 5 seconds.
UP
UP
DOWN
DOWN
UP
57