Honda HS1810Z Owner's Manual page 39

HS2411Z models only:
Weights (optional parts)
For clearing in steps, the specified weights (optional parts) can be
mounted on the weight holder (see page
Do not set any parts but the weights on the weight holder. Do not use
the weight holder for towing, etc.
Use only the specified weights and use the upper and lower weights
as a set. Order the weights for the snowblower from an authorized
Honda dealer.
Each weight weighs approximately 15 kg. If you can not install the
weights by yourself, consult an authorized Honda dealer.
Installation:
1. Set the lower weight on the weight holder and insert the mounting
bolt.
2. Set the washer and nut on the mounting bolt and tighten the
mounting bolt securely.
WEIGHT HOLDER
WASHER
NUT
3. Set the upper weight on the lower weight and secure the upper
weight with the weight handle.
LOWER WEIGHT
Removal:
Removal procedure is the reverse order of ''Installation''.
36
65 for clearing in steps).
BOLT
LOWER WEIGHT
WEIGHT HANDLE
UPPER WEIGHT