Image Quality Problems - Kyocera TASKalfa 2551ci Service Manual

1-4-3

Image quality problems

If the part causing the problem is not designated as a service part, replace with the assembly comprising the
part.
(1) No image
appears (entirely
white).
See page 1-4-75
(6) Black streaks
are printed verti-
cally.
See page 1-4-77
(11) The leading
edge of the
image is con-
sistently mis-
aligned with the
original.
See page 1-4-78
(16)Fusing is loose. (17)Image is out of
See page 1-4-79
(2) No image (3) Image is too
appears (entirely
black).
See page 1-4-75
(7) Streaks are (8) One side of the
printed horizon-
tally.
See page 1-4-77
(12)The leading (13)Paper is wrin-
edge of the
image is spo-
radically mis-
aligned with the
original.
See page 1-4-78
(18)Image center
focus.
See page 1-4-80
(4) The back-
light.
See page 1-4-76 See page 1-4-76
(9) Spots are
print image is
darker than the
other.
See page 1-4-77 See page 1-4-78
(14)Offset occurs.
kled.
See page 1-4-79 See page 1-4-79
does not align
with the original
center.
See page 1-4-80
1-4-74
(5) White streaks
ground is col- are printed verti-
ored. cally.
See page 1-4-76
(10)Image is
printed.
See page 1-4-78
(15)Part of image is
See page 1-4-79
2NP
blurred.
missing.