Kyocera TASKalfa 2551ci Service Manual page 305

Item No.
U964 Checking of log
Description
Sends a log file saved on the HDD to a USB memory.
Purpose
To transfer a log file saved on the HDD to a USB memory as a means of investigating malfunc-
tions.
Method
1. Press the power key on the operation panel, and after verifying the main power indicator has
gone off, switch off the main power switch.
2. Insert USB memory in USB memory slot.
3. Turn the main power switch on.
4. Enter maintenance item U964.
Execute
Jam Log
5. Select [Execute].
6. Press the start key.
Starts sending the log file saved on the HDD to the USB memory.
Processing is displayed for approximately 3 to 5 minutes.
7. When normally completed, [Completed] is displayed.
8. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
If a problem occurs during auto correction, error code is displayed.
Setting: [Jam Log]
1. Select Jam Log.
2. Select On or Off.
On
Off
3. Press the start key. The setting is set.
Supplement
Instructions on how to obtain a log when the operation panel has frozen
Simultaneously press and hold the *, 8, 6, and Clear keys for 3 to 6 seconds to start logging.
The memory indicator keeps lighting during a log is generated and goes off when completed.
* : The logs obtained in this manner can be retrieved in the USB flash device using the main-
tenance mode.
Error codes
No Usb Storage
No File
Mount Error
File Delete Error
Display
Executes transferring a log file.
Switches functions for obtaining logs at a paper jam.
Display
Set On.
Set Off.
Display
USB memory is not inserted
File is not found
Failure to delete the existing files in the USB flash device
Failure to copy from the HDD to the USB flash device
Description
Description
Description
Description
1-3-208
2NP