Change Of Installing Specialist's Code; Electro-Catch Test; Release Of Electro-Catch In Service Mode; Change Of Coded Lock Code - Laskomex CD-2502 Series Installation, Service And Programming Manual

The code of an installing specialists enables entering the entry phone programming code. In case of installing
specialists or property administrators it is convenient to use one common code for all entry phones which should be
maintained. After having restored default settings of entry phone or codes of combination lock the manufacturer's
value of the code is restored. To change the old code of an installing specialist, the old code should be given and
a new one should be entered.
P-7 MLX module support - backup/upload of EC parameters
This procedure allows the installer to exchange data between electronic cassette and MLX module, which is making
export of parameters from electronic cassette to the MLX module or import from MLX module to the electronic
cassette.
This procedure enables the installing specialist to enter the staircase e.g. to service the installation. Owing to this
he does not have to ask for opening the door by the occupants. Activation of this procedure makes that the door is
unblocked and then the entry phone returns to normal operation mode. This procedure may also be used for quick
quitting the programming mode.
To change the code of coded lock the following activities are done:
Activate procedure P-9. When on the display of external panel a message - appears number of apartment
for which lock code will be changed should given.
When on the display symbol - - - - appears four digits of a new code should be entered.
After having entered the last digit on the display a symbol - will appear. The operation can be repeated for
the next number or finished by using a key KEY
9

Entry phone use

9.1

Connection with apartment

To make the connection with the apartment, its number should be entered from
the keyboard. After the lapse of 3 s a uniphone in this apartment will ring and
on the panel display message CALL will appear. Then on the display message
[OuO] will appear which will inform that entry phone waits for picking up the
P-6 Change of installing specialist's code
6
P-8 Release of electro-catch in service mode
P-9 Change of coded lock code
9
OLD
CODE
1 2 3 4
8
NEW
CODE
1 2 3 4
40
9 ENTRY PHONE USE
NEW
CODE
1 2 3 4