Table of Contents
Advertisement
Parameters P2 can have values [-0-] or [-1-]. In third column default value of parameter is given. Value [-1-] means
switched on function, value [-0-] – switched off function. In fourth column type of electronic cassette (U or H) is
shown where parameter's edition is possible.
EAu
Sound signal of sign
selected from the
keyboard
ton
Multitone signalling
of sign selected from
the keyboard
dJ
APo
Acoustic confirming
opening the electro-
catch
CEn
Switching on coded
lock service
CEd
Permission to edi-
tion of coded lock
codes by occupants
CPo
Permission to con-
firm the use of lock
code
CEr
Confirming the use
of a wrong code of
coded lock
CHA
Request
to
code of coded lock
during
entering
user's menu
idE
Switching on/off of
electronic keys
idA
Registration of elec-
tronic keys by users
CAon
Supply of camera
and illumination
P-2 Functions realized by entry phone
PARAM.
PARAM.
No 1
No 2
2
3
1
U,H
Selection of any sign from the keyboard may be signaled with short acoustic
signals.
1
U,H
Selection of a key may be signalled with the same sound (one tone sig-
nalling) or for every key sound of different pitch may be attributed (mul-
titone signalling). The use of this function requires fulfilling the following
condition EAu=1 and tone=1.
0
U,H
Duration of acoustic signal which signals selection of any sign from the
keyboard is as long as time of keystroke but no longer then 1 second. The
use of this function requires fulfilling the following condition EAu=1 and
ton=1.
0
U,H
If parameter is set up on value "1" each opening of electro-catch will be
signalized in external panel by acoustic signal.
1
U,H
Setting 0 value makes that function of coded lock will be switched off for
all users regardless of setting for the individual apartments.
1
U
By default the occupants have the possibility to change the codes of a com-
bination lock in user's menu. Setting this parameter to value "0" blocks
this possibility to all occupants regardless of individual settings.
1
U
Each unblocking of door by means of a coded lock makes that three short
acoustic signals are generated in a uniphone mounted in an apartment whose
code was used to open the door. Parameter set to "0" enables to switch
off this signalization in all uniphones. The signaling can be switched off for
the selected numbers (see procedure 8, page 38).
0
U
Entering the wrong code to a combination lock makes that two long acoustic
signals will be generated in a uniphone mounted in an apartment to which
there was an attempt to use a code to open the door. This is a signal for
occupants that somebody tries to break the code of a combination lock.
This option allows switching off this signalization in all uniphones.
enter
0
U
Setting parameter value to "1" forces to enter the code of coded lock during
entering user's menu.
1
U,H
Setting parameter value to "1" permits using electronic keys iButton (Dal-
las) and/or RFID.
1
U,H
Setting parameter value to "1" permits the users to register new electronic
keys from user's menu.
0
U,H
Supply of camera and illumination of camera in external panel can be turn
on continuously [1] or only during the conversation [0]. If users want to
monitor picture from camera also in the night, than the illumination of
camera should be turn on continuously.
NOTE: Supplying camera is shown on picture 9.
NOTE: Even if illumination of camera is turn on continuously, it will
be turn off automatically by photoelement in case of good enough
external illumination.
8 PROGRAMMING OF ENTRY PHONE
EDITION -
EDITION -
NEW VALUE
OLD VALUE
1 2
31
CHANGE
ACCEPTATION
RETURN
C
Hide quick links:
Advertisement
Table of Contents
