Installation Of Electronic Cassette And Power Supply Adaptor - Laskomex CD-2502 Series Installation, Service And Programming Manual

6.3 Installation of electronic cassette and Power supply adaptor

is not recommended.
Figure 8: External panel – setting output impedance in a panel in video version.
M
J J
Figure 9: External panel – setting supplying camera and kind of used display in a panel in
video version.
Installation of a panel with the list of occupants Panel with the list of occu-
pants CP-2502N cannot be equipped with video camera so it is not used in entry
phones in video version.
When installing a cassette with a list of occupants one must remember to place
a description prior to placing the rivets. The description should be made on a piece
of paper of dimensions 51 x 90 mm. It is best to make a print on A4 sheet of paper
and then it should be cut to get the required size. 4 mm margin should be left at
each edge of the sheet. Print should be made on a white sheet of paper of basis
weight approx. 100 g/m2 using a laser printer. Ink printer should not be used for
this purpose because the print may be smeared due to moisture. That is why it is
recommended to laminate the sheet with a printed list. Any graphic program may
be used for making the print e.g. Corel Draw or Photoshop.
In video version lists of occupants are not available.
6.3 Installation of electronic cassette and Power supply adaptor
Electronic cassette and power supply adaptor should be mounted inside the build-
ing, most preferably in a place which is not accessible for unauthorized persons. It is
recommended to place both devices in an installation box, the cassette is mounted
by means of 4 screws or on a rail DIN. To the place where the power supply adapter
100 124 136
JP1
JP2
K
JP1
K1
K2
K3
K4
K5
G
K6
D
6 INSTALLATION AND ACTIVATION
M
P4
J J
JP1 continuous supplying camera
JP1 supplying camera while its illumination,
according with EUc parameter
JP2 3 segments display
JP2 4 segments display
19
K
K1
K2
K3
K4
K5
K6
G
D