Laskomex CD-2502 Series Installation, Service And Programming Manual page 37

Digital entry phone system
Table of Contents

Advertisement

P-4-4
deL
Key deleting
P-4-5
Ldel
Resetting the key
attributed to the
apartment
P-4-6
Pdel
Resetting
recorded in the
defined item
P-4-7
Id
Key identification
U,H
Deleting the key from memory will take place after applying it to the
reader. On the display a message CAS will appear and a number
which defines the memory item in which the deleted key was recorded.
NOTE: To delete special key or administrator's key use procedure P-4-6.
4
U
Key resetting procedures:
Start program P-4-5. On the display message LdEl will appear.
Give the apartment number and confirm it with key KEY . En-
try phone will search the first memory item in which key number
attributed to the selected apartment is recorded
If the key has been located, on the display the following messages
will appear successively P and xx where xx is a number which
defines number of memory cell in which key number was saved.
To reset the key select key C . On the display message CAS will
appear for a moment. Entry phone will start searching next keys.
Use key KEY . to pass to the next item. If in the next few seconds
none key is used, the entry phone will search automatically the next
key attributed to the selected apartment number.
As soon as the whole base is searched message End will be dis-
played. End
4
key
U,H
Procedure is used for key resetting after having given the memory item
in which the key was recorded. After starting the procedure on the
display a message P— will appear. After memory item is given and
after confirming with key KEY the key number will be deleted, which
will be confirmed by message CAS . If given item is free on the display
message FrEE will be shown.
4
U,H
Procedure is used for key identification. After applying the key to the
reader on the display an information will appear in which item it will be
recorded P - x and to which apartment it is attributed: L - x , (if it is
not attributed L - 0 ). If identified key is defined as serviced message
SER will appear on the display.
36
8 PROGRAMMING OF ENTRY PHONE
APARTMENT
NUMBER
4
4
APARTMENT
NUMBER
IN MEMORY
5
6 3
CELL
NUMBER
IN MEMORY
6
6 3
CELL
NUMBER
APARTMENT
NUMBER
IN MEMORY
7
CELL
NUMBER
C

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents