Stand Mounting Kit 241501 - Graco PrecisionMix ii Instructions And Parts List

Stand Mounting Kit 241501

1. Select the desired location for the mounting stand.
Be sure to leave sufficient space around the
equipment for operator access, routing of hoses
and cabling, and ventilation.
22 in.
(559 mm)
Fluid Panel
Depth: 17.4 in.
(442 mm)
Dimensions and Mounting Holes
Fig. 3.6
Installation
Mounting Components
56 in.
(1422 mm)
55.25 in.
(1403 mm)
30 in.
(762 mm)
28.75 in.
(730 mm)
28.75 in.
(730 mm)
2. Drill holes in the floor, using the mounting stand
base as a template, and install anchors as needed.
3. Secure the mounting stand to the floor.
19 in.
(483 mm)
Color Change Panel
Depth: 9 in.
(229 mm)
15 in.
11 in.
(381 mm)
(279 mm)
10 in.
(254 mm)
20.56 in.
(522 mm)
70 in.
(1778 mm)
TI0170
3–9