Disassembling Of Clamp Unit - Riso GR 3770 Technical Manual

MASTER CLAMP & LOADING SECTION
REMOVAL

2. DISASSEMBLING OF CLAMP UNIT

DISASSEMBLY
1) Remove the clamp spring.
2) Detaching the C-ring (× 1) fixing the clamp slide shaft, remove the motor unit.
C-ring
Clamp spring
Clamp slide shaft
3) Remove mounting screws (× 2) of Compensator Plate, remove the compensator plate, the metal, the collar
(short), Drive Gear II, and the collar (long).
4) Loosening the fixing set screw of the clamp cam, remove the cam.
5) Remove mounting screws (× 4) of the clamp motor remove the motor.
Metal
Drive gear
Set screw
Compensator plate
Collar
Clamp motor
Clamp cam
5 - 7 GR3770