MASTER CLAMP & LOADING SECTION
REMOVAL
2. REMOVAL
1. CLAMP UNIT
REMOVAL
1) Turn off the power and remove the back cover.
2) Disconnect connectors of the clamp motor and Clamp Safety SW.
3) Remove mounting screws (× 4) of the clamp unit, remove the unit.
- Precaution in Assembly -
• Be sure to use fixing screws of M4 × 6 (short screw). (A long screw, if used, can hit the drum.)
GR3770
5 - 6
Pan-head Screw SW. W