MACHINE SUMMARY
NOTICE
Please be sure to follow the procedures as below in installation :
NOTICE
1 Remove the parts in 5 places as shown in the figures below.
2 Activate the Test mode.
3 Enter No.133 to release the electrical lock.
(1) Remove the securing screw on the Scanner
Unit Securing Plate to release the lock.
Caution
Do not turn the power ON with Scanner Unit Securing Plate left unremoved, which may damage the machine.
GR3770
Securing Plate
Shock Absorbing sheet
Scanner unit securing plate
1 - 4
Press Plate
Securing Block
(2) Place the Scanner Unit Securing Plate into the
left end of the hole, then secure it again.
Styrofoam