Table of Contents
Advertisement
Getting Started
Unpacking your
GMC1042MP3 Micro
System
Carefully remove your CD micro system from its
packaging. You may wish to store the
packaging for future use.
Box Contents:
- CD/MP3/WMA micro system
- 2 speakers (speaker cables attached)
- Remote control
- MW Loop Antenna
- User Guide
AC CONNECTION
Plug the power cord into an AC outlet
having 230v,50Hz only. Connecting this
unit to other power sources may damage
the unit.
NOTES:
*The AC polarized to help minimize the
possibility of electric shock. If the
polarized plug does not fit into a
nonpolarized AC outlet, do not file or cut
the wide blade; it is the user`s
responsibility to have an electrician
replace the obsolete outlet.
*The power cord should be unplugged
from the outlet when the unit is not
going to be used for a long period of
time.
Installation
Speaker Connection
1. Unwind the cable from each speaker.
2. At the rear of the CD micro system there
are two speaker sockets.
3. Plug the speaker located on the right into
the socket marked 'R' and coloured red.
4. Plug the speaker located on the left into the
socket marked 'L' and coloured white.
5. For optimal stereo effect, place the
speakers approximately 1.5m apart.
AC Power Connection
1. Connect the mains plug to a mains supply
socket and switch on the supply.
2. At the front of the CD micro system unit,
press the POWER button.
3. The LCD display will light up.
Antenna
The FM antenna is attached to the back of the
unit. Unwind the wire. Positioning is described
in the Radio section.
The MW antenna is a separate loop aerial
that plugs into the back of the unit at the socket
marked
MW ANT.'. Its assembly is described
'
in the Radio section.
6
Advertisement
Table of Contents
