Accusonic 8510+ series Reference Manual page 40

5-6 Accusonic Model 8510+ Series Flowmeter
System Settings (1 of 3)
This screen shows Page 1 of the System settings. To access this menu, select the Home icon in the vertical
navigation bar and press the System icon.
A user can view or change the Date/Time, the Device ID, or any of the TCP/IP ModBus specific
connection settings. The IP address can be configured to be set manually (as shown on the display) or
Automatic.
System Settings (2 of 3)
This screen shows Page 2 of the System settings.
A user can view or change Parity and Baud Rate for the serial port interfaces (RS232 and RS485), the
IS/Burst Enable (Pulse Mode standard), or set or enable password protection.
Additionally, the system software (Update HMI) or firmware (Update DSP) can be updated. The HMI or
system software is updated by a USB drive with the updated program file on it. The DSP firmware is
updated by using a SDHC card with the updated firmware file on it plugged directly into the DSP board.
System Settings 1 of 3
System Settings 2 of 3