Typical Parameter List - Accusonic 8510+ series Reference Manual

5-2 Accusonic Model 8510+ Series Flowmeter
operate). In order to show the flowrates on the display, press the HOME icon in the vertical navigation bar
and then select the Section icon on the HOME page.

Typical Parameter List

The parameter list is visible on the display by pressing the Parameter icon. Press the appropriate icon at
the bottom of the display to navigate through the various parameters. After selecting a parameter to be
changed, a numeric entry pad will appear and will be displayed across the top of the display. Press the
various numeric buttons to enter a specific value, verify the entry pad's displayed value; then press
anywhere on the display to store the value. If a parameter has been selected in error, press anywhere on the
display without touching any of the keypad numbers. The ← arrow acts as a backspace function, the C
button clears the keypad's numerical value, and the – is for negative numbers.
A description of each parameter can be found in Section 7 of this manual.
System Parameters
Change a parameter on this screen by pressing the number below the desired parameter label. This will
bring up the numeric entry pad. Press the desired value, verify the value displayed, and press anywhere on
the display to store the new value.
The Parameter icons at the bottom of the screen allow a user to switch between the various parameters.
Note: The SYSTEM PARAMETERS will apply to all Sections in use.
Section Parameters
There are three Section Parameters screens. Refer to the following screens to view the Section Parameters.
System Parameters