Conformity With Emc And Safety Standards - Accusonic 8510+ series Reference Manual

transducers and electronic
unit
Note: Approval from Accusonic should be obtained if the cables are expected to exceed 300 ft (100m).

Conformity with EMC and Safety Standards

The Model 8510+ Flowmeter is designed and constructed in conformity with the following standards or
normative documents, and with the essential requirements of the European Low Voltage Directive
73/23/EEC and the EMC Directive 89/336/EEC with amend. 92/31/EEC and 93/68/EEC.
Low Voltage Directive
EN 61010-1
EMC Directive, Immunity
EN 61326-1 (2006)
IEC 61000-4-11 (2004)
IEC 61000-4-4 (2012)
IEC 61000-4-5 (2005)
IEC 61000-4-6 (2008)
IEC 61000-4-2 (2008)
IEC 61000-4-3 (2010)
EMC Directive, Emission
EN 61000-3-2 (2006)
EN 61000-3-3 (2008)
EN 55011 (2009) Power Line Conducted Emission and Radiated Emission (+ A1: 2010)
Warning: This is a Class A (ITE) product. In a domestic environment this product may
cause radio interference in which case the user may be required to take adequate measures.
Safety Requirements for Electrical Equipment.
Part 2 Industrial
Interruptions (100 ms), dips and voltage variations (+12 to -15%) on supply
Fast transient/bursts.
High energy pulse/transient
Conducted disturbances, induced by radio frequency fields.
150 kHz to 80 MHz (10 V)
Electrostatic discharge
Radiated electromagnetic field 80-1000 MHz, 10 V/m
Harmonic current emitted into power source (+ A1: 2009; + A2: 2009)
Voltage Fluctuation and Flicker Emission
General Specifications
2 kV common, 1 kV normal mode
2 kV common, 1 kV normal mode
8 kV in air, 6 kV in contact
2-3