Variables Display - Accusonic 8510+ series Reference Manual

5-8 Accusonic Model 8510+ Series Flowmeter
File Cabinet
SC Card
USB Drive
Ethernet
NOTE: The 8510+ flowmeter writes a .csv file daily which can be opened with any version of Microsoft Excel.
Each column in the .csv file will have the data variable labels in the top row located directly above the raw data.

Variables Display

Variables are displayed only when the flowmeter is in "Measure" mode and either the Section or Path icons
have been pressed from the Home page.
Section Variables
This screen shows the Section Variables. This screen can be accessed by pressing the Section icon on the
Home page.
All of the section related variables are displayed on one page. For this display, only Sections 1 and 2 have
been turned on and have acoustic paths assigned to them.
The sum of all of the individual section flowrates can be seen at the bottom of the screen.
This shows that the flowmeter is currently configured to log data. If this
icon is not shown, then the flowmeter is not logging data.
A  displays in the icon when a MicroSD card is inserted in the
HMI board. An X indicates there is no MicroSD card present.
A  displays in the icon when a USB drive is inserted in the USB
Port on the vertical connection. An X indicates if there is no USB
drive present.
A  displays in the icon when the Ethernet port is connected. An
X indicates that no Ethernet cable is plugged into the port.
Section Variables