Advertisement
5. Special notes
5.1 Maintenance
Statement
The Clearaudio
Statement
•
If the
turntable is not in use for a long time please disconnect the motor from the mains
supply.
•
Every two years you can lubricate (only if you notice speed variation) the bearing of the turntable plat-
ter with the supplied oil. In this case it is only necessary to put 4 or 5 drops of the oil onto the bearing
shaft.
•
Please take special care to avoid any damage to the power cord.
Any damage should only be repaired only by authorized personal. A damaged power cord must be
exchanged immediately!
Caution!
Don't use abrasive cleaning fluid for the
in a glass of water is sufficient.
Carefully dry all cleaned parts with a cotton lint-free cloth.
The acrylic parts must only be cleaned with special acrylic cleaning fluids and under no cir-
cumstances spirit or fluids based on alcohol. (To avoid the danger of surface damage!)
You will find suitable cleaning fluids either in specialised shops or in the Clearaudio online shop:
www.analogshop.de
.
5.2 Transportation
Should it be necessary to transport the
platter. Otherwise serious damage can occur!
It is also important that the bearing hole is covered to avoid any dust entering the bearing.
Always take of the pulley off of the motor unit to prevent the motor shaft from any damage.
To achieve the full Clearaudio warranty, you are required to fill out and return the corresponding part of
the warranty registration certificate /card to Clearaudio within two weeks after purchase. Only if the
product is returned in its original packing can Clearaudio provide service under warranty.
5.3 Service
If service or repair on any Clearaudio product is necessary, please contact your dealer / distributor or
contact Clearaudio directly. Clearaudio can also inform you of your nearest service location.
PLEASE RETAIN ALL ORIGINAL PACKAGING. You will need it if this unit has to be transported and /
or shipped. Any further questions you may have about this turntable should be directed to the distributor or
directly to Clearaudio at:
© Clearaudio electronic GmbH 2017
does not require any extensive maintenance.
Statement
Statement
Clearaudio electronic GmbH
Spardorfer Str. 150
91054 Erlangen
Germany
Phone: +49 9131 40300100
Fax: +49 9131 40300119
www.clearaudio.de
www.analogshop.de
info@clearaudio.de
turntable. A few drops of window cleaner
turntable, always please be sure to remove the turntable
Statement
User manual
Page 17
Advertisement
