Replacement Components; Storage; Troubleshooting - Taski swingobot 1650 CE User Manual

29. Replacement Components

TASKI NO. INTELLIBOT SKU
7523968 049870
7523969 1300165
7523970 1300755
4132145 3300051
4132144 3300052
4132108 1300027
N/A 1300066

30. Storage

The following items should be taken into consideration when storing the robotic floor scrubbing system.
ENVIRONMENT
Temperature 59° to 86° F (15° to 30° C) operation, -22° to 140° F (-30° to 60° C) storage
Humidity 20% to 75% relative humidity
Attention
Never store the machine with discharged batteries. Otherwise, the batteries will be damaged beyond
repair. Be sure to fully charge batteries whenever storing the machine.

31. Troubleshooting

MALFUNCTION
Machine without function
Leaving water
Navigation issues
Not cleaning floor surface
Machine pulling to one side when
manually driving
If solution fails to correct the
problem
31
ITEM
Filter - Cotton 10 Micron
Filter - Pleated 1 Micron
Filter - Cotton 20 Micron 10"
Front Blade - Squeegee - Linatex - SS
Rear Blade - Squeegee - Linatex - SS
Pad 15" Scrubbing Red
Pad 15" Scrubbing White
POSSIBLE CAUSES
Charger plugged into robot
Battery pack not engaged
Battery not charged
Water flow set too high
Dirty squeegee
Sonar faulty
Mechanical drag
Brush motor not running
Parking brake is not fully
disengaged
TROUBLESHOOTING
• Unplug the charger
• Push battery pack into place
• Load batteries
• Go to settings menu; lower water valve setting
default
• Wipe squeegee with rag
• Flip or replace squeegee blade (can be
flipped up to 3 times before replacement)
• Perform sonar diagnostic, clean sonar
• Inspect casters
• Reset circuit breaker
• Verify no obstacles are trapped in brush head
• Move parking brake lever all the way to the
left, then all the way back to the right
• Contact your service partner