Customer Assistance; Supplies, Parts And Accessories; Intended Use; Personnel Responsibilities - Taski swingobot 1650 CE User Manual

DRIVE SYSTEM
Drive Motors Two 24 VDC precision motors, built-in
encoders, traction water displacement
tread
Vacuum Motor Single 67 CFM vacuum
PRODUCTION
Cleaning Rate Approximately 10,000 sq ft (approx.
929 sq m) per hour (avg.)
BATTERY SYSTEM
Battery Sealed gel cell or AGM deep cycle,
180 AH, 24 VDC output
Run Time Approximately four hours
Optional
Run time can be doubled with battery
Exchange Kit exchange kit
Charger Unit
20 amp, 24 VDC output, 115 VAC input
with automatic shutoff
Charge Time:
Approximate full charge time minimum
12 hours.
CONSTRUCTION
Frame Powder-coated 5052 aluminum and
stainless steel
Exterior High-density, molded, seamless
polyethylene
Machine Length 48" (121.92 cm)
Machine Width 32" (81.28 cm)
Machine Height
43" (109.22 cm)
Machine Weight
720 lbs. (326.6 kg)
ENVIRONMENT
Temperature
59° to 86° F (15° to 30° C) operation,
-22° to 140° F (-30° to 60° C) storage
Humidity
20% to 75% relative humidity
1.1. Statement of Airborne Noise Emission
This machine does not exceed 75 dB(A) during operation or
maintenance.
1.2. Statement of Compliance
This product complies with all applicable European Union
Directives and Harmonized standards as of the date of
manufacture. See product ratings label for specific model
and serial number information.
Applicable EU Directives
2006/42/EC 2004/108/EC
1.3. Applicable EU Harmonized Standards
EN 60204-1 EN 60335-1
EN 60335-1
EN 60335-2-72 (manual mode operation)
EN 12100 EN 13857
EN 14121 EN 55014-1
2
1995/5/EC
EN 12100
EN 349
EN 55014-2

2. Customer Assistance

For questions relating to the operation, maintenance, or
service of this robotic floor scrubber system, please contact:
2.1. Equipment Manufacturer:
Diversey Care Intellibot
12820 West Creek Parkway
Suite B
Richmond, Virginia 23238 U.S.A.
Phone (US): 01.888.837.0002
Email: ir-service@sealedair.com
Web: www.intellibotrobotics.com
2.2. European Union Representative:
Diversey Europe Operations B.V.
Maarssenbroeksedijk 2
3542 DN Utrecht, Netherlands
Email: customerservice.nl@sealedair.com
Phone (EU): 31.030.247.6885

3. Supplies, Parts and Accessories

For optimal machine performance, only Diversey Care
cleaning solutions approved for use with this machine
should be used. To maintain performance, and safety of the
machine, personnel, and property, only TASKI Intellibot parts
and accessories should be used to maintain this robotic floor
scrubber system.
Please contact Customer Assistance for any questions
regarding the use, maintenance, or service of this robotic
floor scrubbing system

4. Intended Use

This robotic floor scrubbing system is an industrial floor
scrubbing machine intended for interior use in commercial
buildings. The machine should only be used for the wet
cleaning of hard commercial floor surfaces.
This machine must be attended by an operator at all times
during use. The operator is responsible for the safe operation
of this machine and must follow the operating and safety
instructions provided in this manual.

5. Personnel Responsibilities

The following Identifies personnel requirements for the safe
use of this equipment.
5.1. Manager
It is the manager's responsibility to ensure that operator(s)
and maintenance personnel are properly trained in the
use and maintenance of this robotic floor scrubber system.
Managers must ensure that operator and maintenance
personnel are provided with the appropriate supplies and
equipment needed to safely operate the machine.