Notifications Menu - Epson EB-5535U User Manual

List of Functions

Notifications menu

When this is set, you receive an email notification if a problem or warning
occurs in the projector.
"Reading error notification mail"
s
Submenu
Set to On to send an email to the preset addresses when a problem
Mail Notification
or warning occurs with a projector.
You can input the IP Address
SMTP Server
projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from
0 to 255)
You can input the port number for the SMTP server. The default
Port Number
value is 25. You can input numbers between 1 to 65535.
p.194
Function
g
for the SMTP server for the
Submenu
From Enter the email address of the sender. You can enter up to 64
single-byte alphanumeric characters. You can enter up to 32
characters on the Configuration menu. When entering more
than 32 characters, use your Web browser to enter the text.
( " ( ) , : ; < > [ \ ] and spaces cannot be used.)
s "Changing Settings Using a Web Browser (Epson Web
Control)" p.190
Set the destination email addresses for the notification email, and
Address 1 Set-
the notification content. You can register up to three
ting/Address 2
destinations. You can enter up to 64 single-byte alphanumeric
Setting/Address
characters. You can enter up to 32 characters on the
3 Setting
Configuration menu. When entering more than 32 characters,
use your Web browser to enter the text. ( " ( ) , : ; < > [ \ ] and spaces
cannot be used.)
s "Changing Settings Using a Web Browser (Epson Web
Control)" p.190
Set to On to monitor the projector using SNMP
SNMP
the projector, you need to install the SNMP manager program on
your computer. SNMP should be managed by a network
administrator. The default value is Off.
You can register up to two IP addresses for the SNMP trap
Trap IP Address
notification destination.
1/Trap IP Ad-
dress 2
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from
0 to 255)
Set the community name of SNMP. You can enter up to 32 single-
Community
byte alphanumeric characters. (Spaces and symbols cannot be
Name
used.)
Set this to On to use the PJLink notification function.
PJLink Notifica-
tion
136
Function
g
. To monitor