Using The Mail Notification Function To Report Problems; Reading Error Notification Mail - Epson EB-5535U User Manual

Monitoring and Controlling
d
Enter the IP address of the projector in the address input box of
the browser to connect to the Epson Web Control screen.
The Epson Web Control screen is displayed.
e
Select Advanced.
a
You need to login to display the Advanced screen. When the
login screen is displayed, enter your user name and password.
(The user name is EPSONWEB and the default password is
admin.)
f
Select Manage Certificates from Network.
g
Click the Choose File button, select the certificate file.
h
Enter the password in the Password box, and then click Set.
i
When the settings are complete, click the Apply.
Using the Mail Notification Function to Report
Problems
When you set Mail Notification, notification messages are sent to the preset
email addresses when a problem or warning occurs with a projector. This
will enable the operator to be notified of problems with projectors even at
locations away from the projectors.
Network - Notifications - Mail Notification
s
a
• Up to a maximum of three notification destinations (addresses) can
be registered, and notification messages can be sent to all three
destinations at once.
• If a projector develops a critical problem and suddenly stops
working, it may not be able to send a message notifying an operator
of the problem.
• If you set Standby Mode to Communication On, you can control
the projector even if it is in standby mode (when the power is
off).
s Extended - Standby Mode

Reading error notification mail

When the Mail Notification function is set to On and a problem or warning
occurs in the projector, the following email will be sent.
Sender: The email address set in From
Subject: EPSON Projector
Line 1: The projector name where the problem has occurred
Line 2: The IP address set for the projector where the problem has
occurred.
Line 3 and on: Details of the problem
194
p.136
p.122