Monitoring and Controlling
ESC/VP21 Commands
You can control the projector from an external device using ESC/VP21.
Command list
When the power ON command is transmitted to the projector, the power
turns on and it enters warm-up mode. When the projector's power has
turned on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and
returns a ":", and then accepts the next command.
If the command being processed terminates abnormally, an error message is
output and a ":" is returned.
The main contents are listed below.
Item
On
Power ON/OFF
Off
Signal selection
HDMI1
HDMI2
HDBaseT (EB-5535U/EB-5530U/
EB-5520W only)
Computer
BNC
LAN
Command
PWR ON
PWR OFF
SOURCE 30
SOURCE A0
SOURCE 80
Auto
SOURCE 1F
RGB
SOURCE 11
Component
SOURCE 14
Auto
SOURCE BF
RGB
SOURCE B1
Component
SOURCE B4
SOURCE 53
Item
Screen Mirroring
(EB-5535U/EB-5530U/EB-5520W only)
On
A/V Mute On/Off
Off
Add a Carriage Return (CR) code (0Dh) to the end of each command and
transmit.
For more details, contact your local dealer or the nearest address provided
in the Epson Projector Contact List.
Epson Projector Contact List
s
Cable layouts
Serial connection
• Connector shape: D-Sub 9-pin (male)
196
Command
SOURCE 56
MUTE ON
MUTE OFF