Network Menu - Notifications Menu - Epson EB-992F User Manual

Projector Network Settings - Network Menu

Network Menu - Notifications Menu

Settings on the Notifications menu let you receive an email notification if a
problem or warning occurs in the projector.
Network > Network Configuration > Notifications
s
Setting Options
Mail Notification On
Off
SMTP Server IP address
Port Number 0 to 65535 (default
is 25)
Description
Set to On to send an email to the preset
addresses when a problem or warning
occurs with a projector.
Enter the IP address for the projector's
SMTP server using 0 to 255 for each
address field.
Do not use these addresses: 127.x.x.x,
192.0.2.x or 224.0.0.0 through
255.255.255.255 (where x is a number
from 0 to 255).
Select a number for the SMTP server
Port Number.
Setting Options
From Up to 32
alphanumeric
Address 1 Setting
characters
Address 2 Setting
Up to 64
Address 3 Setting
alphanumeric
characters from the
Web browser
(do not use " ( ) , : ;
< > [ \ ] spaces)
SNMP On
Off
Trap IP Address 1 IP address
Trap IP Address 2
Community Name Up to 32
alphanumeric
characters
(do not use spaces
and any symbols
other than @)
PJLink Notification On
Off
144
Description
Enter the email address of the sender.
Enter the e-mail address, and select the
alerts you want to receive. Repeat for up
to three addresses.
Set to On to monitor the projector using
SNMP. To monitor the projector, you
need to install the SNMP manager
program on your computer. SNMP
should be managed by a network
administrator.
Enter up to two IP addresses to receive
SNMP notifications, using 0 to 255 for
each address field.
Do not use these addresses: 127.x.x.x or
224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Set the SNMP community name.
Enables or disables the PJLink
notification function.
Available only for models that support
wired LAN projection.