Epson EB-5535U User Manual page 124

List of Functions
Submenu
Operation Direct Power On: Set to On to turn on the projector
simply by plugging it in.
When the power cord is plugged in, note that the projector
turns on automatically in cases such as a power outage
being restored.
Sleep Mode: When set to On, this automatically stops
projection when no image signal is being input and no
operations are carried out.
Sleep Mode Timer: When Sleep Mode is set to On, you
can set the time before the projector automatically turns off
within a range of 1 to 30 minutes.
High Altitude Mode: Set to On when using the projector
above an altitude of 1,500 m.
Auto Source Search: Set to On to automatically detect an
image signal from another source and project the image
when there is no image signal from the current source.
Auto Power On: If it is set to HDMI1 or Computer, the
projector turns on when a signal is received from the
HDMI1 port or the Computer port, even when the
projector is in standby status.
A/V Mute Settings: Peform settings related to A/V mute.
• A/V Mute Timer: When it is set to On, if no operations
are performed for about 30 minutes after A/V mute is
activated, the projector turns off automatically.
• A/V Mute Release
release A/V mute only by pressing the [A/V Mute] button
(or by sending an A/V mute Off command).
When set to Any Button, A/V mute is released when any
operation is performed on the projector.
s "Hiding the Image and Sound Temporarily (A/V
Mute)" p.78
Advanced: The following items can be set.
• Remote Control Type: You can select Normal or Simple
depending on the type of remote control.
Set this item to Normal to use the remote control
provided with this projector. When Simple is selected, you
Function
*
: When it is set to A/V Mute, you can
Submenu
can use the remote control provided with other Epson
projectors to operate this projector. This is useful if you
want to use a remote control that you are already familiar
with to operate the projector.
However, you cannot use the remote control provided
with this projector if this is set to Simple. Make sure that
the setting is correct because, if the projector is mounted
on the ceiling or somewhere hard to reach, changing it
back to Normal may be difficult. Additionally, you cannot
use the functions that are not equipped with this projector
or the remote control which you use.
• Beep: When this is set to On, the confirmation buzzer
beeps to notify you that the power turns on or off, or
cooling down is finished.
• Indicators: When set to Off, the projector's indicators are
turned off, except for abnormality or warning.
• Inv Direction Button: Set this to On when the projector
is installed on a ceiling.
Date & Time: Make system time settings for the projector.
s "Setting the Time"
124
Function
p.33