Epson EB-5535U User Manual page 95

Wired Network Projection
• Projector Name lets you enter a name up to 16 alphanumeric
characters long to identify the projector over the network.
• PJLink Password lets you enter a password up to 32 alphanumeric
characters long for using the PJLink protocol for projector control.
• Remote Password lets you enter a password up to 8 alphanumeric
characters long for accessing the projector using Remote in Epson
Web Control. (User name is EPSONREMOTE; default password is
guest.)
• Web Control Password lets you enter a password up to 8
alphanumeric characters long for accessing the projector using Web
Control in Epson Web Control. (User name is EPSONWEB;
default password is admin.)
• Moderator Password lets you enter a four-digit number password
for accessing the projector as a moderator using EasyMP Multi PC
Projection or Epson iProjection. (No password is set by default.)
• Projector Keyword lets you turn on a security password to prevent
access to the projector by anyone not in the room with it. You
must enter a displayed, randomized keyword from a computer
using EasyMP Multi PC Projection or Epson iProjection to access
the projector and share the current screen.
• Display LAN Info. lets you set the display format for the
projector's network information.
a
Use the displayed keyboard to enter the name, passwords and
keyword. Press [
to highlight characters and press [Enter] to select them.
][ ][ ][ ] buttons on the remote control
f
Select the Wired LAN menu and press [Enter].
g
Assign the IP settings for your network as necessary.
• If your network assigns addresses automatically, select IP Settings
to set the DHCP setting to On.
• If you must set addresses manually, select IP Settings to set the
DHCP setting to Off, and then enter the projector's IP Address,
Subnet Mask, and Gateway Address as necessary.
• If you want to connect the projector to the network using IPv6,
select IPv6 Settings.
"Wired LAN menu" p.134
s
a
To highlight the numbers you want from the displayed
keyboard, press [
control. To select a highlighted number, press [Enter].
h
To prevent the IP address from being displayed on the LAN
standby screen and Home screen, set the IP Address Display
setting to Off.
][ ][ ][ ] buttons on the remote
95