Arc Correction - Epson EB-5535U User Manual

Adjusting Projected Images
f
Repeat steps 4 and 5 as needed to adjust any remaining corners.
g
To complete the corrections, press the [Menu] button.

Arc Correction

Corrects distortion that occurs when projecting on a curved surface.
You can make corrections in 1 pixel increments within the following
ranges.
• When a corner is selected:
You can correct the vertical and horizontal up to 25% of the projector's
panel resolution.
• When one of the other correction points is selected:
You can correct the vertical and horizontal up to 6.25% of the projector's
panel resolution.
Correction method
a
Press the [Menu] button while projecting.
b
Select Geometry Correction from Settings.
c
Select Arc Correction, and then press the [
58
] button.