Epson EB-5535U User Manual page 126

List of Functions
Submenu
Multi-Projection Make settings when projecting from multiple projectors.
s "Multi-Projection Function"
Projector ID: Set the ID from 1 to 30. Off indicates that no
ID is set.
s "ID Settings"
Geometry Correction: Corrects distortion in the projected
image.
s "Correcting Distortion in the Projected Image"
Color Mode: Set to Multi-Projection.
Color Matching: Corrects the difference between the tint
and brightness of each projected image.
s "Color Matching"
Color Uniformity: Adjusts the color tone balance for the
whole screen.
s "Color Uniformity"
RGBCMY: You can adjust the Hue, Saturation, and
Brightness for R (red), G (Green), B (Blue), C (Cyan), M
(Magenta), and Y (Yellow) color components.
s "Adjusting RGBCMY"
Reset: You can reset all adjustment values for the Multi-
Projection menu to their default settings.
Schedule Set- You can set the projector's schedule so that it performs a
tings specific operation at a pre-scheduled time.
s "Scheduling Function"
You can set the language for messages and menus.
Language
Function
p.72
p.32
p.55
p.72
p.187
p.73
p.84
Submenu
Reset You can reset all adjustment values for the Extended menu
to their default settings. However, the following items are
not reset.
Screen, Projection, High Altitude Mode, Auto Source
Search, A/V Mute Release, Remote Control Type, Inv
Direction Button, A/V Output, Monitor Out, Standby
Mode, HDBaseT, Projector ID, Color Mode, Color
Matching, Language
See the following to return all menu items to their default
settings.
s "Reset Menu"
* When User's Logo Protection is set to On in Password Protection, you
cannot change settings related to user's logo. You can make changes after
setting User's Logo Protection to Off.
s "Managing Users (Password Protection)"
Function
p.140
p.87
126