Operation; Control Panel Operation; Menu Map; Configuration (Dmx) - Chauvet EVE F-50Z User Manual

Table of Contents

Advertisement

O
PERATION
4. O
PERATION

Control Panel Operation

To access the control panel functions, use the four buttons located underneath the display. Please refer to
the
Product Overview
to see the button locations on the control panel.
B
F
UTTON
UNCTION
<MENU>
Press to find an operation mode or to back out of the current menu option
<UP>
Press to scroll up the list of options or to find a higher value
<DOWN>
Press to scroll down the list of options or to find a lower value
<ENTER>
Press to activate a menu option or a selected value

Menu Map

M
ODE
DMX Mode
Dimmer
Dimmer Speed
Mode
Fan

Configuration (DMX)

The EVE F-50Z works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer,
which is available from the Chauvet website
DMX_Primer_rev05_WO.pdf.

Starting Address

When selecting a starting DMX address, always consider the number of DMX channels the selected DMX
mode uses. If you choose a starting address that is too high, you could restrict the access to some of the
product's channels.
The EVE F-50Z uses up to 3 DMX channels, which defines the highest configurable address as 510.
If you are not familiar with the DMX protocol, download the DMX Primer from www.chauvetdj.com.
To select the starting address, do the following:
1.
Press <MENU> repeatedly until 1-CH or 3-CH shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select the starting address, from d 1–512.
4.
Press <ENTER>.

D-Fi USB Connectivity

The PN is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from Chauvet
DJ. Simply set the product's DMX Personality and DMX Address, set the DIP switch D-Fi receiving/
transmitting channel, then plug it into the D-Fi USB port.
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so
may cause damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX and manual
display control / menu buttons will be unavailable until you unplug the D-Fi USB. The
priority levels are:
1. D-Fi USB
2. Wired DMX
EVE F-50Z User Manual Rev. 2
P
L
ROGRAMMING
EVELS
1-CH
d--1-512
3-CH
U--
d000—255
OFF
dIM1
dIM
dIM2
dIM3
AUTO
FAN
ON
http://www.chauvetlighting.com/downloads/
D
ESCRIPTION
Selects DMX personality and DMX
starting address
Dimmer control
Dimmer speed settings, off, fast,
medium, or slow
Sets fan speed, auto or full on
3. Manual Digital Display/Menu Buttons
Page 7 of 14

Advertisement

Table of Contents
loading

Table of Contents