Table of Contents
Advertisement
User Guide
PAGE 83
For Exit Zone:
The exit delay is the period of time for leaving a surveillance zone without making false
alarm (i.e. Alarm 1 to Alarm 4). The purpose is to let the user / installer have enough time
to leave the surveillance zone after the digital video recorder is armed. User / installer can
set the delay time for each alarm. Note that if user enables recording action, recording will
be activated when an alarm is triggered during exit delay.
The detail description is shown as follows:
1. User arms the system
2. The alarm is set at exit delay and timer of all alarms begin
3. The 1st trigger is made by Alarm 1 (i.e. user leaves the surveillance zone)
4. 2nd, 3rd and 4th triggers are made respectively
5. User turns on the security switch or waits for all alarm exit delays to expire.
For example, if the time for leaving the surveillance zone is about 8 minutes, user should
adjust the delay time so that Delay 1 = leaving time between the digital video recorder and
Alarm 1, Delay 2 = leaving time between digital video recorder and Alarm 2, Delay 3 =
leaving time between digital video recorder server and Alarm 3 and Delay 4 should be 8
minutes. The alarm will be activated after the exit delay expired.
Advertisement
Table of Contents
